View G156XW01V0_2101917.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

avnet embedded. support aro und the b oard ? www.avnet-embedded.eu datasheet auo g156xw01-v0 avn et em bedded sp e cific at ion. www..net
au optronics corporation product specification g156xw01 v0 document version 1.0 1 ( ) preliminary specification (v ) final specification module 15.6 color tft-lcd model name g156xw01 v0 customer date approved by note: this specification is subject to change without notice. approved by date debblie chiu 2009/12/30 prepared by hsiao chun lin 2009/12/30 desktop display business group / au optronics corporation auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification g156xw01 v0 document version 1.0 2 contents 1.0 handling precautions ........................... ................................................... ...... 4 2.0 general description............................ ................................................... ........ 5 2.1 display characteristics.................................... ................................................... ....................5 2.2 optical characteristics .................................... ................................................... ....................6 3.0 functional block diagram....................... ................................................... . 10 4.0 absolute maximum ratings ....................... ................................................. 11 4.1 tft lcd module ........................................ ................................................... .......................11 4.2 backlight unit......................................... ................................................... ............................11 4.3 absolute ratings of environment................................. ................................................... .....11 5.0 electrical characteristics..................... ................................................... ..... 12 5.1 tft lcd module ........................................ ................................................... ...................... 12 5.1.1 power specification...................................... ................................................... ................. 12 5.1.2 signal electrical characteristics............................. ................................................... ....... 13 5.2 backlight unit......................................... ................................................... ........................... 14 6.0 signal characteristic .......................... ................................................... ...... 16 6.1 pixel format image ...................................... ................................................... .................... 16 6.2 the input data format ...................................... ................................................... ................. 16 6.3 signal description ....................................... ................................................... ..................... 17 6.4 timing characteristics .................................... ................................................... .................. 18 6.5 timing diagram......................................... ................................................... ........................ 19 6.6 power on/off sequence ..................................... ................................................... .......... 20 7.0 connector & pin assignment..................... ................................................. 21 7.1 tft lcd module ........................................ ................................................... ...................... 21 7.1.1 pin assignment ......................................... ................................................... .................... 21 7.2 backlight unit......................................... ................................................... ........................... 22 7.2.1 signal for lamp connector ..................................... ................................................... ....... 22 8.0 reliability test ................................ ................................................... .......... 23 9.0 shipping label ................................. ................................................... ......... 24 10.0 mechanical characteristics .................... ................................................... 25 auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification g156xw01 v0 document version 1.0 3 record of revision version and date page old description new description remark 0.1 2009/10/05 first edition for customer n/a 0.2 2009/11/30 11 4.2 backlight unit ccfl current max. 7.5 4.2 backlight unit ccfl current max. 8.0 delete ccfl current min. 14 ccfl operation current (ircfl) max. 7.5 1. delete ccfl standard current (iscfl) 2. ccfl operation current (ircfl) max. 8.0. 3. delete ccfl operation current min. 4. delete ccfl life time typ. 15 note 7: definition of life time: brightness becomes 50%. the minimum life time of ccfl unit is on the condition of 7.5ma ccfl current (maximum value)and 25 2 . note 7: definition of life time: brightness becomes 50%. the minimum life time of ccfl unit is on the condition of 7.5ma ccfl current and 25 2 . 0.3 2009/12/30 12 idd input current typ. 0.75; max. 0.855 pdd vdd power typ. 3.75; max. 4.25 idd input current typ. 0.43; max. 0.5 pdd vdd power typ. 2.15; max. 2.5 1.0 2009/12/30 all final version auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification g156xw01 v0 document version 1.0 4 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open or modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor ti lt the interface connector of the tft module. 11) after installation of the tft module into an enclosure, do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammability grade is used in the lcd module. the lc d module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the ccfl in hazardous voltage circuit. auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 5 numpages 29 g156xw01 v0 2.0 general description this specification applies to the 15.6 inch-wide co lor a-si tft-lcd module g156xw01.the display supports the hd - 1366(h) x 768(v) screen format and 16.7m colors (rgb 6-bits + hi- frc data). all input signals are lvds interface and this module doesnt cont ain an inverter board for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 15.6 active area [mm] 344.232 (h) x 193.536 (v) pixels h x v 1366(x3) x 768 pixel pitch [um] 252 (per one triad) 252 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white white luminance ( center ) [cd/m 2 ] 300 cd/m 2 (typ.) contrast ratio 500 (typ.) optical response time [msec] 8ms (typ., on/off) nominal input voltage vdd [volt] +5.0 v power consumption (vdd line + ccfl line) [watt] 13.5 w (typ.), 15 w (max.) (without inverter, all black pattern) weight [g] 1160 (typ.), 1300(max.) physical size [mm] 363.8(w) x 215.9(h) x 14.3(d) typ. electrical interface one channel lvds support color 16.7m colors (rgb 6-bit + hi-frc ) surface treatment anti-glare, 3h rohs compliance rohs compliance tco03 compliance tco03 compliance auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 6 numpages 29 g156xw01 v0 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 : item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 75 75 85 85 - - vertical (up) cr = 10 (down) 70 70 80 80 - - horizontal (right) cr = 5 (left) 75 75 85 85 - - viewing angle [degree] vertical (up) cr = 5 (down) 75 75 85 85 - - 1,2 contrast ratio normal direction 350 500 - 3 raising time (t rr ) - 6 9 falling time (t rf ) - 2 4 response time [msec] raising + falling - 8 13 4 red x 0.608 0.638 0.668 red y 0.303 0.333 0.363 green x 0.260 0.290 0.320 green y 0.561 0.591 0.621 blue x 0.123 0.153 0.183 color / chromaticity coordinates (cie) blue y 0.052 0.082 0.112 white x 0.283 0.313 0.343 color coordinates (cie) white white y 0.299 0.329 0.359 5 central luminance [cd/m 2 ] 240 300 - 6 luminance uniformity [%] 75 80 - 7 crosstalk (in 60hz) [%] 1.5 8 flicker db -20 9 auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 7 numpages 29 g156xw01 v0 center of the screen tft-lcd module m easured distance photo detector lcd panel note 1: measurement method the lcd module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring (at surface 35 ) . in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. note 2: definition of viewing angle measured by eldim (ezcontrast 88) viewing angle is the measurement of contrast ratio R 10 and R 5, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 () horizontal left and right and 90 () vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 8 numpages 29 g156xw01 v0 note 3: contrast ratio is measured by topcon sr-3 note 4: definition of response time measured by westar trd-100a the output signals of photo detector are measured when the input signals are changed from full black to full white (rising time, tr r ), and from full white to full black (falling time, tf f ), respectively. the response time is interval between the 10% and 90% (1 frame at 60 hz) of amplitudes. tr r + tf f = 8 msec (typ.). note 5: color chromaticity and coordinates (cie) is measured by topcon sr-3 note 6 : central luminance is measured by topcon sr-3 note 7: luminance uniformity of these 9 points is defined as below and measured by topcon sr-3 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = 100 90 10 0 % optical response white tr f tr r 100 10 0 % optical response white black tr f tr r black 1 frame 1 frame auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 9 numpages 29 g156xw01 v0 note 8: crosstalk is defined as below and measured by topcon sr-3 ct = | yb C ya | / ya 100 (%), where ya = luminance of measured location without gray level 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) note 9: test patern: subchecker pattern measured by topcon sr-3 r g b r g b r g b r g b r g b r g b method: record dbv & dc value with trd-100 level dc hz) 30 level(at ac log 20 (db) flicker = gray level = l127 gray level = l0 amplitude time dc ac auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 10 numpages 29 g156xw01 v0 3.0 functional block diagram the following diagram shows the functional block of the 15.6 inch color tft-lcd module: connector connector dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1366*(3)*768 pixels tft-lcd 1366*(3)*768 pixels x-driver ic goa g1 d1 d4098 inverter dc power lvds +5.0v x pcb asic(auo11101) g768 rsds transmitter rsds transmitter 2 ccfl connector connector dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1366*(3)*768 pixels tft-lcd 1366*(3)*768 pixels x-driver ic goa g1 d1 d4098 inverter dc power lvds +5.0v x pcb asic(auo11101) g768 rsds transmitter rsds transmitter 2 ccfl i/f pcb interface: jae / fi-xb30ssl-hf15 stm / msbkt2407p30hb mating type: fi-x30hl (locked type) auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 11 numpages 29 g156xw01 v0 4.0 absolute maximum ratings absolute maximum ratings of the module are as following: 4.1 tft lcd module 4.2 backlight unit item symbol min max unit conditions ccfl current icfl - 8.0 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min. max. unit conditions operating temperature top 0 +50 [ o c] operation humidity hop 5 90 [%rh] storage temperature tst -20 +60 [ o c] storage humidity hst 5 90 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceeding maximum values note 3: for quality perfermance, please refer to auo iis(incoming inspection standard). operating range storage range item symbol min max unit conditions logic/lcd drive voltage vdd 0 6.0 [volt] note 1,2 auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 12 numpages 29 g156xw01 v0 5.0 electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as following: note 1: measurement conditions: the duration of rising time of power input is 470 us. +5.0v +12.0v vcc r147k r21k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c11uf/16v q3ao6402 g d2 s d1 d5 d6 c30.01uf/25v c21uf/25v (high to low)control signal (lcd module input) symbol parameter min typ max unit conditions vdd logic/lcd drive voltage 4.5 5.0 5.5 [volt] +/-10% idd input current - 0.43 0.5 [a] vdd= 5.0v, all black pattern at 60hz pdd vdd power - 2.15 2.5 [watt] vdd= 5.0v, all black pattern at 60hz irush inrush current - - 2.5 [a] note 1 vddrp allowable logic/lcd drive ripple voltage - - 300 [mv] p-p vdd= 5.0v, all black pattern at 60hz auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 13 numpages 29 g156xw01 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd is off. please refer to specifications of sn75lvds82dgg (texas instruments) in detail. characteristics of each signal are as following: symbol parameter min typ max units condition vth differential input high threshold - +50 +100 [mv] vicm = 1.2v note 1 vtl differential input low threshold -100 -50 - [mv] vicm = 1.2v note 1 vid input differential voltage 100 - 600 [mv] note 1 vicm differential input common mode voltage +1.0 +1.2 +1.5 [v] vth-vtl = 200mv (max) note 1 note 1: lvds signal waveform auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 14 numpages 29 g156xw01 v0 5.2 backlight unit parameter guideline for ccfl inverter is under stable conditions at 25 ( r o o m t e m p e r a t u r e ) : parameter min. typ. max. unit note ccfl operation current (ircfl) - 7.5 8.0 [ma] rms 2 ccfl frequency (fcfl) 40 43 60 [khz] 3, 4 ccfl ignition voltage (vicfl, t a = 0 ) - 1170 1410 [volt] rms ccfl ignition voltage (vicf, ta= 25 ) - 970 1170 [volt] rms 5 ccfl operation voltage (vcfl) 594 660 (@7.5ma) 726 [volt] rms ccfl power consumption (pcfl) - 10 - [watt] 6 ccfl life time (ltcfl) 50,000 - - [hour] 7 note 1: typ. values are auo recommended design values. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 while designing an inverter, it is suggested to check safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] when ccfl is damaged. *4 generally, ccfl has certain delay time after applying kick-off voltage. it is recommended to keep on applying kick-off voltage for 1 [sec] until discharge. *5 reducing ccfl current will increase ccfl discharge voltage and generally increases ccfl discharge frequency. so all the parameters of the inverter should be carefully designed so the inverter will not produce too much leakage current from high-voltage output. *6 both ccfls in the ccfl set (1 ccfl lamps on each side of a panel) is designed for identical phase driving. reversed phase driving of ccfl set is not encouraged. *7 for designing ccfl current, it is highly recommanded to use symmetric and consistent sinusoidal wave for each ccfl input current with asymmetric ration of 10% or less in both postive area and negative area (ie. 0.9*2*i rms < i 1 & i 2 < 1.1*2*i rms ) as refer to the following diagram, otherwise proper ccfl functionality cannot be guarantied. auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 15 numpages 29 g156xw01 v0 note 2: c c f l s t a n d a r d c u r r e n t i s m e a s u r e d a t 2 5 2 . note 3: ccfl discharge frequency should be carefully determined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect lamp life and reliability characteristics. note 5: ccfl inverter should be able to release power that has generating capacity exceeding 1410 volt. lamp units need maximum voltage, 1410 volt, for ignition. note 6: the variance of ccfl power consumption is 10%. (ircfl vcfl 2 = pcfl) note 7: definition of life time: brightness becomes 50%. the minimum life time of ccfl unit is on the condition of 7.5ma ccfl current a n d 2 5 2 . auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 16 numpages 29 g156xw01 v0 6.0 signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 365 1 366 1st line 768 line 6.2 the input data format note 1: r/g/b data 7:msb, r/g/b data 0:lsb de vs hs og0 or5 or4 or3 or2 or1 or0 ob0 og3 og4 og1 og2 ob1 og5 ob5 ob3 ob4 ob2 or7 ob7 or6 ob6 og7 og6 clkin+rin0 +/- clkin- rsvd current cycle rin1 +/-rin2 +/- rin3 +/- auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 17 numpages 29 g156xw01 v0 6.3 signal description the module using one lvds receiver sn75lvds82(texas instruments). lvds is a differential signal technology for lcd interface and high speed data transfer device. lvds transmitters shall be sn75lvds83(negative edge sampling). the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. pin # signal name description 1 reserved no connection 2 reserved no connection 3 reserved no connection 4 gnd ground 5 rxin0 - - lvds differentia l data input, ch0 6 rxin0+ +lvds differential data input, ch0 7 gnd ground 8 rxin1 - - lvds differential data input, ch1 9 rxin1+ +lvds differential data input, ch1 10 gnd ground 11 rxin2 - - lvds differential data input, ch2 12 rxin2+ +lvds differentia l data input, ch2 13 gnd ground 14 rxclkin - - lvds differential clock input, ch3 15 rxclkin+ +lvds differential clock input, ch3 16 gnd ground 17 rxin3 - - lvds differential data input, ch3 18 rxin3+ +lvds differential data input, ch3 19 gnd ground 20 reserved internal used (recommend no connection ) 21 reserved internal used (recommend no connection ) 22 reserved internal used (recommend no connection ) 23 gnd ground 24 gnd ground 25 gnd ground 26 avdd power +5v, (typical) 27 avdd power +5v, (t ypical) 28 avdd power +5v, (typical) 29 avdd power +5v, (typical) 30 avdd power +5v, (typical) auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 18 numpages 29 g156xw01 v0 note1: start from left side 6.4 timing characteristics basically, interface timing described here is not actual input timing of lcd module but close to output timing of sn75lvds82dgg (texas instruments) or equivalent. item symbol min typ max unit data clk tclk 50 76 90 [mhz] period th 1446 1560 1936 [tclk] display area tdisp(h) 1366 1366 1366 [tclk] h-section blanking tblk(h) 80 200 570 [tclk] period tv 778 806 888 [th] display area tdisp(v) 768 768 768 [th] v-section blanking tblk(v) 10 38 120 [th] frame rate f 50 60 75 [hz] note : de mode only auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 19 numpages 29 g156xw01 v0 6.5 timing diagram auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 20 numpages 29 g156xw01 v0 6.6 power on/off sequence vdd power and lamp on/off sequence are as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. value parameter min. typ. max. unit t1 0.5 - 10 [msec] t2 0 - 50 [msec] t3 200 - - [msec] t4 100 - - [msec] t5 0 16 50 [msec] t6 - - 100 [msec] t7 1000 - - [msec] auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 21 numpages 29 g156xw01 v0 7.0 connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation interface connector / interface card manufacturer jae stm type part number fi-xb30ssl-hf15 msbkt2407p30hb mating housing part number fi-x30hl (locked type) 7.1.1 pin assignment pin# signal name pin# signal name 1 reserved 2 reserved 3 reserved 4 gnd 5 rxin0- 6 rxin0+ 7 gnd 8 rxin1- 9 rxin1+ 10 gnd 11 rxin2- 12 rxin2+ 13 gnd 14 rxclkin- 15 rxclkin+ 16 gnd 17 rxin3- 18 rxin3+ 19 gnd 20 reserved 21 reserved 22 reserved 23 gnd 24 gnd 25 gnd 26 avdd 27 avdd 28 avdd 29 avdd 30 avdd auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 22 numpages 29 g156xw01 v0 7.2 backlight unit physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. connector name / designation lamp connector / backlight lamp manufacturer cvilux type part number cp05t021pe0 mating type part number yeonho 35001hs-02l 7.2.1 signal for lamp connector connector no. pin no. input color function 1 hot1 red high voltage upper cn1 2 cold1 white low voltage connector no. pin no. input color function 1 hot1 red high voltage lower cn2 2 cold1 white low voltage auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 23 numpages 29 g156xw01 v0 8.0 reliability test environment test conditions are listed as following table. items required condition note temperature humidity bias (thb) ta= 50 , 8 0 % r h , 3 0 0 h o u r s high temperature operation (hto) t a = 5 0 , 5 0 % r h , 3 0 0 h o u r s low temperature operation (lto) t a = 0 , 3 0 0 h o u r s high temperature storage (hts) t a = 6 0 , 3 0 0 h o u r s low temperature storage (lts) ta= - 2 0 , 3 0 0 h o u r s vibration test (non-operation) acceleration: 1.5 grms wave: random frequency: 10 - 200 hz duration: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 46 cm, package test thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 1 on/off test on/10sec, off/10sec, 30,000 cycles contact discharge: 8kv, 150pf(330? ) 1sec, 15 points, 25 times/ point. esd (electro static discharge) air discharge: 15kv, 150pf(330? ) 1sec 15 points, 25 times/ point. 2 altitude test operation:10,000 ft non-operation:30,000 ft note 1 : the tft-lcd module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature change consists of varying the temperature from -20 to 60 , and back again. power is not applied during the test. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. note 2 : en61000-4-2, esd class b: certain performance degradation allowed no data lost self-recoverable no hardware failures. auo confidential for avnet_europe internal use only / 2010/3/11 www..net
au optronics corporation product specification document version 0.1 24 numpages 29 g156xw01 v0 9.0 shipping label the label is on the panel as shown below: note 1: for pb free products, auo will add for identification. note 2: for rohs compatible products, auo will add for identification. note 3: for china rohs compatible products, auo will add for identification. note 4: the green mark will be presented only when the green documents have been ready by auo internal green team. g156xw01 v0 auo confidential for avnet_europe internal use only / 2010/3/11 www..net
ver 0.1 10.0 mechanical characteristics auo confidential for avnet_europe internal use only / 2010/3/11 www..net
ver 0.1 auo confidential for avnet_europe internal use only / 2010/3/11 www..net
avn et em bedded offic es. loc al avn et em bedded bu s in esses : 03/2010 www.avnet-embedded.eu all trademarks and logos are the property of their respective owners. this document provides a brief overview only and is not intended to be complete or binding offer. product information, including information related to a products specifications, uses or conformance with legal or other requirements, is obtained by avnet from its suppliers or other sources deemed reliable and is provided by avnet on an ?as is basis. avnet makes no representation as to the accuracy or completeness of the product information and avnet disclaims all representations, warranties and liabilities under any theory with respect to the product information, including any implied warranties of merchantability, fitness for a particular purpose, title and/or non- refringement. all product information is subject to change without notice. d e nm a rk trident avnet nortec a/s banemarksvej 50b, 1 2605 broendby phone: +45 3678 6250 fax: +45 3678 6255 trident-denmark @ avnet-embedded.eu f in la n d trident avnet nortec oy tiilenpolttajankuja 3 a b 1720 vantaa phone: +358 207 499260 fax: +358 942 597446 trident-finland @ avnet-embedded.eu f r a nce axess technology avnet emg france sa immeuble 154, parc chene 2 5, alle du general benoist 69000 bron phone: +33 4 72 81 02 30 fax: +33 4 72 81 02 34 axess-bron @ avnet-embedded.eu axess technology avnet emg france sa 4, rue de la couture batiment milan, bp 20209 94518 rungis cedex phone: +33 1 49 78 88 88 fax: +33 1 49 78 88 89 axess-rungis @ avnet-embedded.eu axess technology avnet emg france sa za la hallerais le semiramis 2, alle du communel 35770 vern sur seiche phone: +33 2 99 77 37 02 fax: +33 2 99 77 33 38 axess-rennes @ avnet-embedded.eu ge rm a n y (a u st ri a, c ze c h r e pu bl ic , h un ga r y, po la n d, sw i tze r la n d) avnet embedded avnet emg gmbh gruber stra?e 60c 85586 poing phone: +49 8121 775 500 fax: +49 8121 775 550 poing @ avnet-embedded.eu avnet embedded avnet emg gmbh l?tscher weg 66 41334 nettetal phone: +49 8121 775 500 fax: +49 8121 775 550 nettetal @ avnet-embedded.eu italy avnet embedded avnet emg italy srl via manzoni, 44 20095 cusano milanino phone: +39 02 66092 1 fax: +39 02 66092 498 milano @ avnet-embedded.eu n ethe r la n ds (belg ium , l u xe m b our g) avnet embedded avnet b.v. takkebijsters 2 4802 bl breda phone: +31 76 5722400 fax: +31 76 5722404 benelux @ avnet-embedded.eu sp a in avnet embedded avnet iberia sa c/chile, 10 - edificio madrid 92 28290 las matas (madrid) phone: +34 91 372 7142 fax: +34 91 636 9788 madrid @ avnet-embedded.eu swede n ( nor way) trident avnet nortec ab esplanaden 3 d 172 67 sundbyberg phone: +46 8 564 725 50 fax: +46 8 760 01 10 trident-sweden @ avnet-embedded.eu uni ted kin gd om ( ir ela n d) tdc avnet emg ltd. pilgrims court, 15/17 west street reigate, surrey, rh2 9bl phone: +44 1737 227888 fax: +44 1737 243872 tdc @ avnet-embedded.eu trident avnet emg ltd. pilgrims court, 15/17 west street reigate, surrey, rh2 9bl phone: +44 1737 227800 fax: +44 1737 244698 trident-uk @ avnet-embedded.eu www..net

▲Up To Search▲

Price & Availability of G156XW01V0

	To Download G156XW01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .